Lemon Yellow ASA Prime

Experience Durability with Lemon Yellow ASA Prime

ASA filament (acrylonitrile styrene acrylate) is a thermoplastic 3D printing material that is perfect in many ways and is suitable for many different applications. It has a similar chemical makeup to ABS plastic but offers three notable improvements: better mechanical properties, it is naturally UV resistant, and it simply produces amazing finished prints. Coex 3D offers ASA in the same colors as our ABS giving you 11 colors to choose from and is available in both 1.75mm and 2.85mm diameters in varying spool sizes. 

Although ASA can safely be printed using an open bed printer, it is still recommended to print ASA in an enclosed printer which will allow parts to cool slowly and uniformly which helps to prevent shrinkage and warping. 

Coex 3D’s ASA products are made with 100% virgin resin and high-quality colorants with no added fillers.  All Coex 3D filament is made in our production facility in Green Bay, WI, USA using industrial-grade extruders and laser measuring quality control to ensure quality and consistency with every spool.   

Looking for a high-performance 3D printing polymer that provides excellent UV stability and weather resistance? Look no further than Lemon Yellow ASA Prime, the perfect choice for your 3D printing needs.

Our Lemon Yellow ASA Prime is an Acrylonitrile Styrene Acrylate (ASA) polymer that is specifically formulated for 3D printing. It offers the ideal balance of mechanical strength, toughness, stiffness, and weather resistance that you can rely on for extended periods.

Lemon Yellow ASA Prime is well-suited for outdoor and automotive applications thanks to its exceptional weather resistance and UV stability. Our ASA polymer is perfect for creating functional prototypes, end-use parts, and low-volume production runs.

If you are looking for a material that can withstand harsh weather conditions, retain its color and mechanical properties in direct sunlight, and provide long-lasting performance, then Lemon Yellow ASA Prime is the right choice for you. With its easy-to-print characteristics and excellent layer adhesion, this ASA filament offers great value for money.

Recommended Print Settings

Coex 3D recommends the following print settings when printing with our ASA. Settings will vary depending on your specific printing setup.

• Hotend Temperature: 235 °C - 245 °C
  
  • Important! This temperature range may seem hotter than you're used to for other ASA filaments. Using 100% virgin resin causes our ASA to require slightly higher printing temperatures.
    
• Heated Bed Temperature: 80 °C - 1000 °C
  
• Recommended Build Surfaces/Adhesives
  • Glass Build Surface
  • PEI Build Surface
  • Magigoo
  • Painter's Tape
  • Glue Stick
  • ABS slurry
• Cooling Fan: Recommended. 
• Enclosure: Recomended to prevent warping
• Drying: ASA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion/inconsistent extrusion or excess stringing. You may also hear a "popping" sound coming from the hotend during printing. We recommend drying our ASA at 65 °C for at least 3 hours if it has been exposed to excess humidity.

Get your hands on Lemon Yellow ASA Prime today and experience the optimal balance of rigidity, toughness, UV resistance, and weather ability. Buy now and start creating durable, high-quality 3D prints that will last for years to come!